Latch Striker

REMOVAL







1. Fold down the rear seat back assembly.







2. Remove the four push-pins and the quarter trim panel on the wagon.







3. Remove the four plastic pushpins and remove the rear seat trim panel, sedan only.







4. Remove the three (A) bolts and remove the (B) rear seat back latch striker.

INSTALLATION







1. Position the rear seat back latch striker and install the three bolts.
2. Raise the rear seat back and verify that the rear seat back release latch properly engages the rear seat back latch striker; adjust if necessary.
3. Install the rear seat back trim panel, sedan only.
4. Install the rear quarter trim panel, wagon only.