Fuse Block: Service and Repair

REMOVAL






1. Disconnect the battery ground cable.






2. Remove the two retainers and the LH cowl side trim panel.






3. Disconnect the C7 electrical connector.






4. Remove the nut and disconnect the interior fuse junction panel from the upper mounting tab.






5. Detach the interior sub fuse junction panel.






6. Remove the safety belt warning chime.






7. Disconnect the electrical connectors from the rear of the interior fuse junction panel.






8. Disconnect the two electrical connectors from the front of the interior fuse junction panel.






9. Detach the (A) wiring harness connectors and the (B) HEATER circuit breaker from the interior fuse junction panel.

INSTALLATION






1. To install, reverse the removal procedure.