Ignition Switch: Service and Repair

REMOVAL
1. Disconnect the battery ground cable and wait one minute for the air bag backup power supply to be depleted.





2. Remove the three screws and remove the upper and lower steering column shrouds.
3. Disconnect the ignition switch electrical connector.





4. Remove the (A) screw and remove the (B) ignition switch electrical connector cover.





5. Remove the two ignition key reminder switch screws.

NOTE: The ignition key reminder switch is an integral part of the ignition switch and cannot be replaced separately.





6. Remove the ignition switch.





INSTALLATION
To install, reverse the removal procedure.