Crankshaft Main Bearing

Crankshaft Specifications
Clearance, Oil 0.020-0.065 mm (0.0008-0.0026 inch)
End Play 0.100-0.300 mm (0.004-0.012 inch)
Journals
Diameter
Main 57.98-58.00 mm (2.2827-2.2835 inch)
Connecting Rod 43.89-43.91 mm (1.7279-1.7287 inch)
Length
Thrust Bearing 28.825-28.854 mm (1.135-1.135 inch)
Out of Round 0.008 mm (0.0032 inch)
Runout 0.025 mm (0.001 inch)
Taper (Per 25.4 mm (1.0 inch):
Maximum 0.008 mm (0.003 inch)
Finish (RMS)
Connecting Rod 0.3 micro mm (12 micro inch)
Main Bearing 0.6 micro mm (25 micro inch)
Limit (RMS)
Front 0.6 micro mm (25 micro inch)
Rear 0.9 micro mm (35 micro inch)
Main Bearing Thrust Face 0.9 micro mm (35 micro inch)
Main Bearing Thrust Face
Runout Limit, Front 0.025 mm (0.001 inch)
Main Bearing Bore Diameter @ ±30°
PF Bearing Cap P/L 62.2835-62.3145 mm (2.4521-2.4533 inch)
Other Than Above 62.2935 ±0.0100 mm (2.4525 ±0.00039 inch)

Tightening Specifications
Main Cap 90-108 Nm (66-79 ft. lbs.)