Antenna Isolator Module

REMOVAL
1. Remove rear package tray trim and LH and RH roof trim panels.
2. Push connector release tab and gently pull rear window defroster grid lead connectors from grid on LH and RH sides of rear window.
3. Open luggage compartment door and access bottom of rear package tray.
4. Remove two nuts on top of package tray retaining radio antenna isolator to bottom of rear package tray.
5. Disconnect two coaxial cable connectors from radio antenna isolator.
6. Disconnect rear window defroster power lead connector from radio antenna isolator.
7. Remove radio antenna isolator and rear window defroster grid leads.

NOTE: It is necessary to feed heater grid leads through from top of package tray.

INSTALLATION
1. Follow removal procedure in reverse order.