Hazard Warning Lamps: Description and Operation

The hazard flasher system, which operates independently from the ignition switch lock cylinder, contains the following features:
- All turn signal lamps will flash in unison by pressing and releasing the hazard actuator located on the top part of the steering column.
- The switch is identified by a double triangle symbol.
- The actuator will move out or away from the steering column tube to the ON position.
- Hazard flasher system is turned off by pushing and then releasing the actuator.
- The actuator should remain in or toward the steering column tube in the OFF position.
- The actuator is serviced as part of multi-function switch.

NOTE: The turn signal system is deactivated when the hazard flasher system is ON. Turn signal lever motion does not affect the hazard flasher system.