Engine Air Cleaner

REMOVAL
1. Loosen engine air cleaner intake collar at air cleaner outlet tube.
2. Remove air cleaner outlet tube from Mass Air Flow sensor (MAF sensor).
3. Disconnect engine control sensor wiring from mass air flow sensor and Intake Air Temperature sensor (IAT sensor).
4. Remove engine air cleaner retaining nuts and engine Air Cleaner (ACL).

INSTALLATION
1. Follow the removal procedure in reverse order.
2. Tighten engine air cleaner retaining nuts to 2.3-3.4 Nm (21-30 lb in). Tighten engine air cleaner intake collar to 3.4-4.6 Nm (30-40 lb in). Tighten air cleaner outlet tube retaining nut to 2.3-3.4 Nm (21-30 lb in).