Troubleshooting (Start Here)
PRELIMINARY INSPECTIONThe following items must be checked prior to beginning the diagnostic procedures.
KNOW/ UNDERSTAND THE CONCERN
In order to properly diagnose a concern you must first understand the customer complaint or condition. Customer contact may be required in order for the technician to begin to verify the concern. You must understand the conditions as to when the concern occurs. For example:
- hot or cold vehicle temperature.
- hot or cold ambient temperature.
- vehicle driving conditions.
After understanding when and how the concern occurs then proceed to verifying the concern.
VERIFICATION OF CONDITION
This section provides information which must be used in both determining the actual cause of customer concerns and performing the appropriate service procedures.
NOTE: Some transmission conditions may cause engine concerns. An EPC short circuit may cause alternate firing. The torque converter clutch not disengaging will stall the engine.
The following procedures must be used when verifying customer concerns for transmission:
REQUIRED EQUIPMENT
- AODE/41370W Cable and Overlay 007-00122 or equivalent
- Rotunda Transmission Tester 007-00130 or equivalent
- Transmission Range (TR) Sensor Cable "E" 418-F107 (007-00111) or equivalent
- Digital Sensor Overlay 007-00131 or equivalent
- New Generation Star (NGS) Tester 418-FO48 (007-00500) or equivalent
- Rotunda 73 Digital Multimeter 105-ROO51 or equivalent
- Digital Transmission Range Sensor Alignment Tool 307-351 (T97L-7001O-A)
- Rotunda 104 Pin Breakout Box 418-049 014-00950) or equivalent
- MLP-C Cable 007-00128 or equivalent
DETERMINE CUSTOMER CONCERN
- hot or cold vehicle operating temperature
- hot or cold ambient temperatures
- type of terrain
- vehicle loaded/ unloaded
- city /highway driving