Quick Test 1.0 - Visual Inspection

Perform the Visual Check and Vehicle Preparation procedures.
Inspect the following:
- air cleaner and inlet ducting
- all engine vacuum hoses for damage: leaks, cracks, blockage, proper routing, etc.
- PCM system wiring harnesses for proper connections, bent or broken pins, corrosion, loose wires, proper routing, etc.
- powertrain control module, sensors and actuators for physical damage
- engine coolant for proper level
- transmission fluid for proper level and condition
- any NON-factory installed items wired into the transmission or PCM harnesses

NOTE: Perform all necessary servicing before continuing with Quick Tests.