Camshaft, Engine

GENERAL SPECIFICATIONS
Number of Camshaft Bearings 5
Drive Timing Belt
Bearing Journal Dia. 25.960-25.980 mm
Camshaft Bearing Radial Clearance 0.020-0.070 mm
Camshaft End float 0.080-0.220 mm
Lobe Lift Intake 6.23 mm
Lobe Lift Exhaust 6.23 mm
Allowable Lobe Lift Loss 0.127 mm
Theoretical Valve Maximum Lift Intake 10.28 mm
Theoretical Valve Maximum Lift Exhaust 10.28 mm
End Play 0.02-0.20 mm
Service Limit 0.20 mm
Journal to Cylinder Head Bearing Surface Clearance 0.0335-0.0835 mm
Journal Diameter Standard Runout Limit 0.127 mm (a)
Journal Diameter standard Out-of-round 0.08 mm
Camshaft Drive Assembled Gear Face Runout Crankshaft 0.65 mm
Camshaft Drive Assembled Gear Face Runout Camshaft 0.275 mm

(a) Runout of Center Bearing Relative To Bearing Nos. 1 and 5.