Attachment II - Labor and Parts Information

Labor Allowances

NOTE:
Alignment is not required and, therefore, is not covered under this program.

Parts Requirements

Parts Ordering Information





Parts will not be direct shipped for this program. Order your parts requirement through normal order processing channels. There will be no order controls on these part numbers.

SPRING ORDERING INSTRUCTIONS:
Refer to parts catalog. Springs must be ordered using the proper vehicle spring codes as identified on the vehicle certification label. Use this code to select the proper spring service part number from the application charts, which are sequenced by spring code.

NOTE:
Both springs must be replaced, even if only one spring is broken.

ORDER INFORMATION

DOR/COR number 50255 identifies parts ordered for this campaign.

DEALER PRICE

For latest prices, check DOES II or updated price book.

EXCESS STOCK RETURN

Excess stock returned for credit must have been purchased from Ford Customer Service Division in accordance with Policy Procedure Bulletin 4000.