Front

REMOVAL
1. Remove seat and track assembly from the vehicle. Place seat on a clean surface.
2. Remove seat back assembly and front seat tracks from the cushion assembly.
3. Disengage plastic J-retainers from front seat cushion frame and springs. Remove front seat cushion cover.
4. Pull front seat cushion cover back and cut wire retaining hog rings. Remove front seat cushion cover.
5. Remove front seat cushion pad, if necessary.

INSTALLATION
1. Install front seat cushion pad.
2. Transfer all tie down wires to their respective listings in new front seat cushion cover.
3. Position front seat cushion cover over front seat cushion pad and front seat cushion frame and spring, with listing exposed. Install tie down wire in the listing, secure tie down wire to front seat cushion pad with three hog rings.
4. Install plastic J-retainers to front seat cushion frame and spring.
5. Install front seat tracks and back assembly to front seat cushion frame and spring.
6. Install seat and track assembly.
7. Check the restraint system for proper operation.