Front Bucket Seats

REMOVAL
1. Remove four front seat track to floor insulators by disengaging spring clips and carefully pulling outward.
2. Remove bolts and nuts retaining front seat tracks to front floor pan.
3. Carefully remove seat assembly from vehicle.

CAUTION: Use care when handling seat and track assembly. Dropping assembly or sitting on seat not secured in vehicle may result in damaged components.

INSTALLATION
1. Follow removal procedure in reverse order.
2. Tighten seat track-to-floorpan nuts and bolts to 19-26 N.m (14-19 Lb-Ft). Tighten rear inboard nuts to 68-92 N.m (51-67 Lb-Ft). Tighten rear outboard nuts to 19-26 N.m (14-19 Lb-Ft).
3. Check the restraint system for proper operation.