Front Disc

WARNING: BRAKE FLUID CONTAINS POLYGLYCOL ETHERS AND POLYGLYCOLS. AVOID CONTACT WITH EYES. WASH HANDS THOROUGHLY AFTER HANDLING. IF BRAKE FLUID CONTACTS EYES, FLUSH EYES WITH RUNNING WATER FOR 15 MINUTES. GET MEDICAL ATTENTION IF IRRITATION PERSISTS. IF TAKEN INTERNALLY, DRINK WATER AND INDUCE VOMITING. GET MEDICAL ATTENTION IMMEDIATELY.

NOTE: Brake friction material inherently generates noise and heat to dissipate energy. As a result, occasional squeal is possible, and it is aggravated by severe environmental conditions such as cold, heat, wet, snow, salt, mud and other conditions.

Front disc brakes consist of a 276 mm (10.9 inch) full cast, vented front disc brake rotor and have the following features:
- The front disc brake caliper has a steel caliper piston with a piston seal and a trapped-type dust boot.
- The front disc brake caliper is attached to the front disc brake caliper anchor plate with two 8 mm hex bolts.
- The front disc brake caliper anchor plate is attached to the front wheel knuckle with two 12 mm hex bolts.