Crankshaft

GENERAL SPECIFICATIONS
Main Bearing Journal
Diameter 63.973-64.003 mm (2.5190-2.5198 in)
Out-of-Round Limit 0.008 mm (0.0003 in)
Taper Limit 0.015 mm (0.0006 in) TOTAL 0.008 mm (0.0003 in) per 25 mm (1 in)
Journal Runout Limit 0.05 mm (0.002 in)
Surface Finish (RMS) 0.25 micrometers (10.0 micro in)
Thrust Bearing Journal
Length 25.775-25.825 mm (1.0148-1.067 in)
Connecting Rod Journal
Diameter 53.983-54.003 mm (2.1253-2.1261 in)
Out-of-Round Limit 0.008 mm (0.0003 in) MAX 0.015 mm (0.0006 in) TOTAL
Taper Limit 0.008 mm per 25 mm (0.0003 in per in)
Surface Limit (RMS) 0.25 micrometers (10.0 micro in)
Main Bearing Thrust Face
Surface Finish (RMS) 0.4 micrometers (0.157 micro in) Front and Rear
Runout Limit 0.025 mm (0.001 in)
Crankshaft End Play 0.10-0.20 mm (0.004-0.008 in)