Oil Pump

GENERAL SPECIFICATIONS
Gear Backlash 0.02-0.03 mm (0.008-0.012 in)
Gear Radial Clearance (Idler and Drive) 0.125-0.050 mm (0.0055-0.002 in)
Gear End Height 0.140-0.050 mm (0.0055-0.0005 in)
Idler Shaft to Idler Gear Clearance 0.044-0.010 mm (0.0017-0.0005 in)
Driver Shaft to Housing Clearance 0.048-0.013 mm (0.0019-0.0005 in)

TORQUE SPECIFICATIONS
Oil Pump to Cylinder Block Bolt 40-55 Nm (30-40 ft. lbs.)