Headlamp Adjustment

NOTE: Before aiming headlamps, make sure of the following:

^ Tire pressures are all at specifications.
^ All tires are the same size.
^ Excess weight has been removed from luggage compartment.
^ Vehicle is on flat, level ground.
^ Headlamp is at room temperature.

1. To achieve up/down adjustment, turn adjustment ratchet until bubble in level gauge is in the orange area of gauge.

NOTE: Adjustment should not be required if center of bubble is within ±4 graduations (inches /25 feet) of zero.

2. To achieve left/right adjustment, turn adjustment ratchet until left-right angle degree gauge is at 0 degree on the gauge. Adjustment specifications are 0 degrees.