Hydraulic System: Testing and Inspection

1. Check the brake fluid level. If the fluid level is below the MIN line on the brake master cylinder reservoir add the required amount of High Performance DOT 3 Brake Fluid C6AZ-19542-AB meeting Ford specification ESA-M6C25-A or DOT 3 equivalent.





2. Inspect the (A) brake line nuts and the (B) brake master cylinder reservoir for fluid leaks.
3. Inspect the brake lines and hoses for fluid leaks.
4. If equipped, inspect the rear wheel cylinder for leaks.
5. If equipped, inspect the rear disc brake caliper for leaks.
6. Inspect the front disc brake calipers for leaks.
7. If a hydraulic leak is detected. Repair or replace as necessary.