Maintenance and Inspection

WARNING: ALL SAFETY BELT ASSEMBLIES, INCLUDING RETRACTORS, BUCKLES, FRONT SEAT BELT BUCKLE SUPPORT ASSEMBLIES (SLIDE BAR, IF EQUIPPED), SHOULDER BELT HEIGHT ADJUSTER (IF EQUIPPED), CHILD SAFETY SEAT TETHER BRACKET ASSEMBLIES (IF SO EQUIPPED) AND ATTACHING HARDWARE SHOULD BE INSPECTED AFTER ANY COLLISION. ALL SAFETY BELT ASSEMBLIES SHOULD BE REPLACED UNLESS A QUALIFIED TECHNICIAN FINDS THAT THE ASSEMBLIES SHOW NO DAMAGE AND OPERATE PROPERLY. SAFETY BELT ASSEMBLIES NOT IN USE DURING A COLLISION SHOULD ALSO BE INSPECTED AND REPLACED IF EITHER DAMAGE OR IMPROPER OPERATION IS NOTED.

Safety belt assemblies should be periodically inspected to make sure they have not become damaged and that they remain in proper operating condition, particularly if they have been subjected to severe stress such as a collision.

Before installing the new safety belt assembly, the safety belt attaching areas must be inspected for damage and distortion. If the attaching points are damaged and distorted, the sheet metal must be reworked back to its original shape and structural integrity.

Install the new safety belts and then perform Functional Test Procedure.Component Tests and General Diagnostics