Flywheel Dowels

REMOVAL





1. Remove the flywheel dowels by using a drift pin where the flywheel dowel is installed in an open hole and a pair of locking pliers where the flywheel dowel is installed in a blind hole.

NOTE: Take care not to damage the flywheel dowel holes or the surface areas around the flywheel dowel during removal.

INSTALLATION
1. Install all flywheel dowels by driving them into place using a brass or plastic mallet.

NOTE: Care should be taken to drive the flywheel dowel squarely into place until it is fully seated and to not damage the surrounding surface areas.