Flow of Diagnosis

1. Verify the customer concern by operating the system.
2. Visually inspect for obvious signs of mechanical or electrical damage.

VISUAL INSPECTION CHART

Mechanical
^ Seat tracks constructed or damaged
^ Seat base track alignment
^ Mechanical linkage(s) obstructed or damaged
^ Seat frame alignment
^ Internal operating cables obstructed, darnaged or broken

Electrical
^ Fuse(s)
^ Wiring harness
^ Loose or corroded connect or (s)
^ Motor(s)
^ Multifunction switch
^ Damaged connector(s)

3. If an obvious cause for an observed or reported concern is found, correct the cause (if possible) before proceeding to the next step.
4. If the concern is not visually evident, verify the symptom and refer to the Symptom Chart. Symptom Related Diagnostic Procedures