| Connecting Rod Bearings Clearance To Crankshaft | | 0.020 - 0.065 Millimeter (mm) |
| Bearing Wall Thickness (STD) | | 1.476 - 1.488 Millimeter (mm) |
| Clearance Of Crankshaft W/O Cylinder Head Min - Desired | | 0.0457 - 0.0660 Millimeter (mm) |
| Clearance Of Crankshaft W/O Cylinder Head Min - Allowable | | 0.0461 - 0.0859 Millimeter (mm) |
| Clearance Of Crankshaft W/Cylinder Head Min - Desired | | 0.0279 - 0.0483 Millimeter (mm) |
| Clearance Of Crankshaft W/Cylinder Head Min - Allowable | | 0.0276 - 0.0674 Millimeter (mm) |
| Bearing Wall Thickness Min | | 2.117 - 2.129 Millimeter (mm) |
| Connecting Rod Piston Pin Bore Diameter Min | | 20.570 - 20.610 Millimeter (mm) |
| Crankshaft Bearing Bore Diameter | | 46.89 - 46.91 Millimeter (mm) |
| Out-Of-Round Limit, Piston Pin Bore Min | | 0.008 Millimeter (mm) |
| Taper Limit Piston Pin Bore | | 0.0038/25.4 Millimeter (mm) |
| Length (Center To Center ) Min | | 131.905 - 131.975 Millimeter (mm) |
| Out-Of-Round Limit - Bearing Bore | | 0.010 Millimeter (mm) |
| Taper Limit - Bearing Bore | | 0.010 Millimeter (mm) |
| Alignment Bore To Bore (Max. Differential) Twist Min (bend mm) | | 0.05 (0.038) Millimeter (mm) |
| Side Clearance (assembled to crank) std. min (service limit) | | 0.092 - 0.268 (0.356) Millimeter (mm) |
| Bore Diameter, Big-End | | 49.89 - 49.91 Millimeter (mm) |
| Bore Diameter, Small End | | 19.951 - 19.981 Millimeter (mm) |
| Inside Diameter - Big- End Bearing Shells (Fitted) | | 46.926 - 46.960 Millimeter (mm) |
| Big-End Bearing Radial Clearance | | 0.016 - 0.070 Millimeter (mm) |
| Big-End Bearing Axial Clearance | | 0.090 - 0.320 Millimeter (mm) |
| Connecting Rod Bearing Cap Bolts | Stage 1 | 26 Foot Pound-Force (ft.lb) |
| Stage 2 | 90 Degrees |