| Main bearing journal diameter | 57.98 - 58.0 Millimeter (mm) |
| Out Of Round Limit | 0.008 Millimeter (mm) |
| Taper Limit | 0.008 per 25.4 Millimeter (mm) |
| Journal Runout Limit | 0.05 Millimeter (mm) |
| Runout Of Bearings 2, 3, And 4 Crankshaft End Play | 0.100 - 0.300 Millimeter (mm) |
| Surface Finish (Rms) Micro | 0.3 Micro-Meters (micro-m) |
| Clearance To Crankshaft | 0.020 - 0.065 Millimeter (mm) |
| Thrust Bearing Journal Length | 28.825 - 28.854 Millimeter (mm) |
| Connecting Rod Journal Diameter | 43.89 - 43.91 Millimeter (mm) |
| Out Of Round Limit | 0.008 Millimeter (mm) |
| Taper Limit | 0.008 per 25.4 Millimeter (mm) |
| Surface Limit (RMS) Micro Rear | 0.6 Millimeter (mm) |
| Surface Limit (RMS) Micro Front | 0.9 Millimeter (mm) |
| Main Bearing Thrust Face Surface Finish (RMS) micro | 0.6 Millimeter (mm) |
| Rear Micro | 0.9 Millimeter (mm) |
| Front Runout Limit (T.I.R.) | 0.025 Millimeter (mm) |
| Crankshaft End Play | 0.100 - 0.300 Millimeter (mm) |
| Main Bearing Journal Diameter | 57.980 - 58.000 Millimeter (mm) |
| Main Bearing Journal End Float | 0.09 - 0.26 Millimeter (mm) |
| Main Bearing Cap Bolts | 63 Foot Pound-Force (ft.lb) |