Cylinder Head Assembly
| Bore Diameter (Insert Counterbore Diameter) | Intake | 39.940-39.965 mm |
| Exhaust | 34.940-34.965 mm | |
| Gasket Surface Flatness | 0.04/26 mm 0.08/156 mm 0.15 mm total | |
| Head Face Surface Finish | 0.2/2.5 mm 0.8 mm total | |
| Cylinder Head Bolts The cylinder head bolts must not be tightened more than once. | Stage 1 | 25 Nm (18 ft.lb) |
| Stage 2 | 45 Nm (33 ft.lb) | |
| Stage 3 | 105° | |
| VCT Oil Feed Flange To Cylinder Head | 89 in.lb | |
| Blanking Plug, Cylinder Head Oil Channel | 11 ft.lb | |
| EI Ignition Coil Bracket To Cylinder Head | 15 ft.lb | |
| Electronic Power Steering Pump Mounting Plate To Cylinder Head | 35 ft.lb | |
| Engine Lifting Eye To Cylinder Head | 12 ft.lb |