Draining and Filling

Drain





1. WARNING: When releasing the system pressure, cover the expansion tank cap with a thick cloth to prevent the possibility of coolant scalding. Failure to follow these instructions may result in personal injury.

Relieve the cooling system pressure.
^ Unscrew the cap slowly.

2. Remove the cap.
3. Raise and support the vehicle.





4. Remove the radiator splash shield.





5. Remove the drain plug.
^ Drain into a suitable container.

6. Replace the drain plug when all coolant has drained.
7. Lower the vehicle.

Refill





1. Fill the expansion tank to the MAX mark.
2. Start the engine and run until normal operating temperature is achieved. Check for leaks and add coolant if necessary.