Connecting Rod
| Length (Center To Center) | 138.06 - 138.4 | |
| Alignment (Bore To Bore Max Difference) Pin Bore And Crankshaft Bearing Bore Must Be Parallel and In Same Vertical Plane Within The Specified Total Difference When Measured At The Ends Of A 203 mm Bar, 101.5 mm On Each Side Of The Centerline | ||
| Twist | 0.050 per 25 | |
| Bend | 0.038 per 25 | |
| Side clearance (assembled to crank) | Standard | 0.100 - 0.30 |
| Service limit | 0.35 MAX | |
| Connecting Rod Bolts | Stage 1 | 23 |
| Stage 2 | 43 | |
| Stage 3 | 90 Degrees |