Fixed Antenna

REMOVAL
1. Open luggage compartment door and remove LH trim panel.
2. Remove radio antenna nut and radio antenna stanchion from radio antenna base and cable.
3. Remove one nut and one bolt retaining radio antenna base and cable inside luggage compartment.
4. Remove radio antenna base and cable and disconnect radio antenna lead in cable from radio antenna base and cable.

INSTALLATION
1. Connect radio antenna lead in cable to radio antenna base and cable.
2. Install radio antenna base and cable with retaining nut and bolt.

NOTE: Do not tighten nuts at this time.

3. Install radio antenna stanchion and radio antenna nut to radio antenna base and cable. Tighten radio antenna nut to 5.9-8.1 N.m (53-71 Lb-In).
4. Tighten previously installed retaining nut and bolt to 10.8-13.2 N.m (8-9 Lb-Ft).
5. Install trim panel in luggage compartment.