Door Locks: Service and Repair

BELLCRANK AND LINK - REAR DOOR

Removal
1. Remove rear door trim panel and watershield from rear door.
2. Remove Y-clip then remove rivet attaching rear door latch bellcrank to door inner panel. Disconnect rear door latch bellcrank from rear door latch control rod link by unclipping retainer or rotating it off the double 90 degree bend.
3. Remove rear door latch push button rod from rear door latch bellcrank. Remove rear door latch bellcrank.
4. Transfer bushings and retaining clips to new rear door latch bellcrank.

Installation
1. Follow removal procedure in reverse order.
2. Use Heavy Duty Riveter 501-D011 (D80L-23200-A) or equivalent to install rivet retaining rear door latch bellcrank to rear door.