Station Wagon

Rear fold-down seat latch is an integral part of the seat back frame. If service is required, the rear seat back frame must be replaced.

REMOVAL
1. Remove seat back from vehicle.
2. Unzip seat back cover at bottom of seat to access seat back latch.
3. Release latch cable from retainer and pivot cable to disconnect from latch.
4. Pull back seat cover for access to handle and retaining bolts.
5. Remove release handle by pushing on the snap features and pulling up on handle.
6. Remove three nuts and remove handle bracket.

INSTALLATION
1. Follow removal procedure in reverse order.
2. Check the restraint system for proper operation.