Cowl Top Inner Panels

REMOVAL
1. Remove RH cowl vent screen and LH cowl vent screen as described.







2. Remove three screws retaining cowl top extension to cowl top panel. Remove RH cowl top extension.
3. Remove four screws retaining LH cowl top extension to cowl top panel.
4. Disengage cowl top inner panel tube from brake master cylinder stud. Remove cowl top extension from vehicle.

INSTALLATION
1. Follow removal procedure in reverse order.







2. Tighten screws to 1.8-2.6 N.m (16-23 lb-in).