Crankshaft Main Bearing
| Lower cylinder block-to-upper cylinder block retaining bolts | Tighten fasteners 1-8 | 22-28 Nm (17-20 ft.lb) |
| Tighten fasteners 9-16 | 37-43 Nm (28-31 ft.lb) | |
| Rotate fasteners 1-16 | Additional 85-95 degrees | |
| Tighten fasteners 17-22 | 20-30 Nm (15-22 ft.lb) | |
| Main Bearings | Clearance to Crankshaft - Desired | 0.025-0.045 mm (0.0009-0.0001 in) |
| Clearance to Crankshaft - Allowable | 0.025-0.050 mm (0.0009-0.0019 in) | |
| Bearing Wall Thickness | Grade 1 | 2.497 mm (0.0983 in) |
| Grade 2 0.250 mm Undersize - Add 0.125 mm to standard or grade 2 thickness. | 2.501 mm (0.0985 in) | |
| Grade 3 | 2.505 mm (0.0986 in) |