Toe, Rear

Part 1 Of 2:

1. Place vehicle on alignment rack.
2. Reset rear toe to nominal specification of +0.06 degrees (+0.031 inch) toe-in for each individual wheel.
a. Loosen lower arm pivot nut approximately one turn.
b. Adjust camber to achieve toe setting by rotating cam head.
c. CAUTION: Use care when tightening so as not to disturb cam/alignment setting.

Hold cam bolt head in position with a back-up wrench and tighten inner pivot nut to 68 - 92 Nm (50 - 67 ft. lbs. ).