Initial Inspection and Diagnostic Overview

1. Verify the customer concern by operating the daytime running lamps.
2. Visually inspect for obvious signs of mechanical and electrical damage.

VISUAL INSPECTION CHART

Mechanical
^ Damaged headlamp switch

Electrical
^ Blown fuse(s):
- Fuse junction panel fuse FOG (10 A)
- Fuse junction panel fuse R. WIPER (10 A)
^ Damaged wiring harness
^ Loose, damaged, or corroded connectors
^ Blown headlamp bulb

3. If the fault is not visually evident, verify the symptom and proceed to Symptom Chart. Symptom Related Diagnostic Procedures