Rear

REMOVAL

1. If equipped, remove the brake drum; If equipped, remove the rear disc brake rotor.





2. Remove the wheel hub.
1. Unstake the rear axle wheel hub retainer.
2. Remove the rear axle wheel hub retainer and discard.
3. Remove the wheel hub.

INSTALLATION





1. CAUTION: Install a new anti-lock brake sensor indicator on the wheel hub because reuse may result in damage.

If necessary, use a (A) press and a (B) steel plate to install the new (C) anti-lock brake sensor indicator on the (D) wheel hub.





2. Install the wheel hub.
1. Position the wheel hub.
2. Install a new rear axle wheel hub retainer.





3. Stake the rear axle wheel hub retainer with a cape chisel.
4. If equipped, install the brake drum; If equipped, install the rear disc brake rotor.