| Connecting Rod Bearings | Clearance to Crankshaft | 0.0006299 - 0.0027559 Inch (in) |
| Bearing Wall Thickness (Std.) | 0.0581 - 0.0586 Inch (in) |
| Bearing Wall Thickness | 0.0833 - 0.0838 Inch (in) |
| Piston Pin Bore Diameter | | 0.8098 - 0.8114 |
| Crankshaft Bearing Bore Diameter | | 1.8460 - 1.8468 |
| Out-of-Round Limit Piston Pin Bore | | 0.0003 |
| Taper Limit Piston Pin Bore | | 0.00015/1 |
| Length (Center to Center) | | 5.193 - 5.196 Inch (in) |
| Out-of-Round Limit Bearing Bore | | 0.0004 |
| Taper Limit - Bearing Bore | | 0.0004 |
| Alignment Bore-to-Bore (max. Differential) | Twist | 0.002 Inch (in) |
| Bend | 0.0015 Inch (in) |
| Side Clearance (Assembled to Crank) | Standard | 0.004 - 0.011 |
| Service Limit | 0.014 |
| Connecting Rod Cap Nuts | | 26 - 30 Foot Pound-Force (ft.lb) |