| Torque Converter Clutch Mechanism | Equipped |
| Torque Converter Stall Torque Ratio | 2.420 |
| Torque Converter Stator Support O-Ring (Inner) Diameter | 3.264 Inch (in) |
| Torque Converter to Converter Housing Installed Height | 0.535 Inch (in) |
| Total End Play | 0.010 - 0.020 Inch (in) |
| Torque Converter Clutch Solenoid Bolt | 70 - 95 Inch Pound-Force (in.lb) |
| Torque Converter To Engine Flywheel Nuts | 26 - 36 Foot Pound-Force (ft.lb) |
| Torque Converter Stator Support Bolts | 96 - 121 Inch Pound-Force (in.lb) |
| Converter Turbine Shaft Seal (Inner) | 0.787 Inch (in) |