Camshaft, Engine
| Lobe Lift Intake | 6.23 Millimeter (mm) |
| Lobe Lift Exhaust | 6.23 Millimeter (mm) |
| Allowable Lobe Lift Loss | 0.127 Millimeter (mm) |
| Theoretical Valve Maximum Lift Intake | 10.28 Millimeter (mm) |
| Theoretical Valve Maximum Lift Exhaust | 10.28 Millimeter (mm) |
| End Play | 0.02 - 0.20 Millimeter (mm) |
| Service Limit | 0.20 Millimeter (mm) |
| Journal To Cylinder Head Bearing Surface Clearance | 0.0335 - 0.0835 Millimeter (mm) |
| Journal Diameter Standard Runout Limit | 0.127 Millimeter (mm) Runout Of Center Bearing relative to bearing Nos. 1 and 5 |
| Journal Diameter Standard Out-Of-Round | 0.08 mm |
| Bearing Journal Diameter | 25.960 - 25.980 Millimeter (mm) |
| Camshaft Bearing Radial Clearance | 0.020 - 0.070 Millimeter (mm) |
| Camshaft End Float | 0.080 - 0.220 Millimeter (mm) |
| Camshaft Bore Inside Diameter No. 1, 2, 3, 4 And 5 | 45.796 - 45.821 Millimeter (mm) |
| Camshaft Bearing Caps | 11 Foot Pound-Force (ft.lb) |
| Intake Camshaft Timing Pulley | 50 Foot Pound-Force (ft.lb) |
| Exhaust Camshaft Timing Pulley (Stage 1) | 44 Foot Pound-Force (ft.lb) |
| Exhaust Camshaft Timing Pulley (Stage 2) | 89 Foot Pound-Force (ft.lb) |
| Exhaust Camshaft Timing Pulley Blanking Plug | 27 Foot Pound-Force (ft.lb) |