Cluster Finish Panel

REMOVAL
1. Adjust the steering column to the full tilt-down position.
2. Remove the instrument panel center finish panel. For additional information, refer to Instrument Panel Center Finish Panel.
3. Remove the headlamp switch. For additional information, refer to Lighting and Horns.







4. Remove the instrument cluster finish panel.
1 Remove the screws.
2 Remove the instrument cluster finish panel. If equipped, disconnect the traction control switch electrical connector.

NOTE: If equipped with a steering column selector lever, position the lever in the 1 position.

INSTALLATION
1. To install, reverse the removal procedure.