Cylinder Block Assembly: Specifications
| Head Gasket Thickness | 0.40 in | |
| Head Gasket Surface Finish | 1.5 mm | |
| Main Bearing Bore Diameter | 2.677 - 2.6780 Inch (in) | |
| Cylinder Bore | Diameter | Refer to Note Grade 1: 89.000 - 89.010 mm (3.50393 - 3.504323 inch) Grade 2: 89.010 - 89.020 mm (3.504323 - 3.504717 inch) Grade 3: 89.020 - 82.030 mm (3.504717 - 3.50511 inch) |
| Surface Finish (RMS) | 0.2 - 0.6 Micron (micron) | |
| Out-Of-Round Limit | 0.0005 Inch (in) | |
| Out-Of-Round Service Limit | 0.0007 Inch (in) | |
| Taper Service Limit | 0.008 Inch (in) | |
| Lower Cylinder Block Bolts And Studs | Refer to Procedure |