Crankshaft
| Main bearing journal diameter | 57.980-58.00 | |
| Main bearing journal end float | 0.009-0.26 mm | |
| Big-end bearing journal diameter | 46.89-46.91 | |
| Main bearing journal diameter | 57.98-58.0 | |
| Out of round limit | 0.008 | |
| Taper limit | 0.008 per 25.4 | |
| Journal runout limit | 0.05 | |
| Runout of bearings 2, 3, and 4 crankshaft end play | 0.100-0.300 | |
| Surface finish (RMS) micro | 0.3 | |
| Clearance to crankshaft | 0.020-0.065 | |
| Thrust bearing journal length | 28.825-28.854 mm | |
| Connecting rod journal diameter | 43.89-43.91 | |
| Out of round limit | 0.008 | |
| Taper limit | 0.008 per 25.4 | |
| Surface limit (RMS) micro | Rear | 0.6 Rear |
| Front | 0.9 | |
| Main bearing thrust face surface finish (RMS) micro | 0.6 | |
| Rear micro | 0.9 | |
| Front runout limit (T.I.R.) | 0.025 | |
| Flywheel clutch face runout limit (T.l.R.) | 0.180 mm | |
| Flywheel ring gear lateral runout (T.I.R.) manual transmission | 0.64 mm | |
| Flywheel ring gear lateral runout (T.l.R.) automatic transmission | 1.5 mm | |
| Crankshaft end play | 0.100-0.300 |