Radio, Stereo, and Compact Disc: Service and Repair

Radio Removal Tool:

SPECIAL TOOL(S)

REMOVAL

NOTE: Make sure the audio unit key code is available before disconnecting the audio unit electrical connectors aid note the audio unit station presets.







1. Using the special tool detach the audio unit.
^ Insert the Radio removal tool into the locating holes until they click into place.
1. Pull the tools gently to the left and right of the audio unit to release the locking tangs.
2. Pull the audio unit out of the instrument panel.







2. Remove the audio unit.
^ Disconnect the four electrical connectors.
^ Disconnect the antenna cable.

INSTALLATION
1. To install reverse the removal procedure.
^ Enter the audio unit keycode and re-program the pre-set audio unit stations.

NOTE: When installing the audio unit make sure the rear support engages on the carrier.