Power Door Mirror

REMOVAL
1. Remove the door trim panel.







2. Remove the bezel.
^ Detach the three retaining clips.







3. Remove the door weatherstrip.







4. Detach the rubber surround.
1. Detach the insert from the window channel.
2. Lift the rubber surround to access the mirror fixings.







5. Disconnect the electrical connector.







6. Remove the exterior rear view mirror.
1. Remove the three retaining nuts.

NOTE: Note the position of any gaskets.

2. Remove the mirror.

INSTALLATION
1. To install, reverse the removal procedure.

NOTE: Make sure that any gaskets are correctly positioned.