Crankshaft Main Bearing
| Bulkhead to cylinder block bolts -- Bolts 1 through 16 are tighten-to-yield and must be replaced. | Stage 1 | Bolts 1-8, 25 Nm |
| Stage 2 | Bolts 9-16, 40 Nm | |
| Stage 3 | Bolts 1-16, 90 Degrees | |
| Stage 4 | Bolts 17-22, 25 Nm | |
| Clearance to crankshaft-desired | 0.025-0.045 mm | |
| Clearance to crankshaft-allowable | 0.025-0.050 mm | |
| Bearing wall thickness-grade 1 | 2.501 mm | |
| Bearing wall thickness-grade 2 | 2.505 mm | |
| Bearing wall thickness-grade 3 | 2.510 mm |