Vehicle Damage Warnings

CAUTION:
^ Do not touch the adhesive surface as re-bonding will be impaired.
^ Avoid touching the trimmed surface as this will inhibit the new adhesive from bonding.
^ To make sure that the PU adhesive cures, it is essential that all bonding surfaces are free of all moisture.
^ The door weatherstrip is attached with a small amount of adhesive at the waste line of the B-pillar. To prevent damage to the weatherstrip, start removing the weatherstrip at the B-pillar waste line in an upward and forward direction.
^ To prevent movement of the door glass alignment spacer, carefully close the door.