Fuel Pump: Service and Repair

REMOVAL
1. Remove the fuel tank. For additional information, refer to Fuel Tank. Service and Repair
2. Disconnect the pressure transducer connector on the top rear comer of the fuel tank.
3. Clean the area around the fuel pump mounting flange.







4. Remove the bolts and remove the fuel pump.

CAUTION: The fuel pump must be handled carefully to avoid damage to the float arm and the filter.

5. Remove and discard the fuel pump mounting gasket.

INSTALLATION
1. Clean the fuel pump mounting flange and the fuel tank mounting surface.
2. Install the fuel pump mounting gasket on the mounting flange.







3. Install the fuel pump.
1 Position the fuel pump in the fuel tank.
2 Install the bolts.
3 Connect the fuel pressure transducer.

NOTE: Tighten fuel pump bolts in a star pattern 1-3-5; 2-4-6.

4. Install the fuel tank. For additional information, refer to Fuel Tank. Service and Repair