Radio, Stereo, and Compact Disc: Service and Repair

Radio Removal Tool:

SPECIAL TOOL(S)

REMOVAL







1. Using the special tool, detach the audio unit.
^ Insert the Radio removal tool into the locating holes until they click into place.
1 Pull the tools gently to the left and right of the audio unit to release the locking tangs.
2 Pull the audio unit out of the instrument panel.

NOTE: Make sure the audio unit key code is available before disconnecting the audio unit electrical connectors and note the audio unit station presets.







2. Remove the audio unit.
^ Disconnect the four electrical connectors.
^ Disconnect the antenna cable.

INSTALLATION
1. To install, reverse the removal procedure.
^ Enter the audio unit keycode and re-program the pre-set audio unit stations.

NOTE: When installing the audio unit make sure the rear support engages on the carrier.