Front Seat

REMOVAL

WARNING: WAIT AT LEAST ONE MINUTE AFTER DISCONNECTING THE BATTERY CABLES BEFORE DISCONNECTING THE ELECTRONIC AIR BAG CONTROL MODULE OR ANY OTHER SUPPLEMENTAL RESTRAINT SYSTEM ELECTRICAL CONNECTORS. FAILURE TO FOLLOW THIS PROCEDURE MAY INCREASE THE POSSIBILITY OF ACCIDENTALLY DEPLOYING THE AIR BAG(S) AND CAUSE PERSONAL INJURY.







1. Remove the left and right-hand rear seat track cover.
1 Remove the retaining screw (each side).
2 Remove the cover (each side).







2. Remove the left and right-hand rear retaining bolts.
^ Remove the two bolts each side.

3. Move the seat fully rearwards.







4. Remove the left and right-hand front retaining bolts.
^ Remove one bolt each side.







5. Disconnect the electrical connectors.
6. Remove the seat.

INSTALLATION












1. To install, reverse the removal procedure.