Torque

Torque Specifications

Torque Specifications (1 Of 7):

Torque Specifications (2 Of 7):

Torque Specifications (2 Of 7):

Torque Specifications (4 Of 7):

Torque Specifications (5 Of 7):

Torque Specifications (6 Of 7):

Torque Specifications (7 Of 7):

Cylinder Head Torque Specifications

LH SIDE







CAUTION: Use care when installing the cylinder head. Damage to the cylinder block and or the cylinder head may result.

NOTE:

^ Make sure the cylinder head is installed in its original position.
^ Tighten the bolts in the indicated tightening sequence in six stages.

Position the left-hand cylinder head and install new cylinder head bolts and washers.

^ Stage 1: Tighten to 40 Nm.
^ Stage 2: Tighten 90 degrees.
^ Stage 3: Loosen 360 degrees (one full turn) in reverse order.
^ Stage 4: Tighten to 40 Nm.
^ Stage 5: Tighten 90 degrees.
^ Stage 6: Tighten 90 degrees.


RH SIDE






CAUTION: Use care when installing the cylinder head. Damage to the cylinder block and/or the cylinder head may result.

NOTE:

^ Make sure the cylinder head is installed in its original position.
^ Tighten the bolts in the indicated sequence in six stages.

Position the right-hand cylinder head and install new cylinder head bolts with washers.

^ Stage 1: Tighten to 40 Nm.
^ Stage 2: Tighten 90 degrees.
^ Stage 3: Loosen 360 degrees in reverse sequence.
^ Stage 4: Tighten to 40 Nm.
^ Stage 5: Tighten 90 degrees.
^ Stage 6: Tighten 90 degrees.