Battery Tray

REMOVAL







1. Disconnect the battery cables.

WARNING: THE BACKUP POWER SUPPLY ENERGY MUST BE DEPLETED BEFORE ANY AIR BAG COMPONENT REPAIR IS CARRIED OUT. TO DEPLETE BACKUP POWER SUPPLY ENERGY, FIRST DISCONNECT THE BATTERY GROUND CABLE, THEN DISCONNECT THE POSITIVE BATTERY CABLE AND WAIT ONE MINUTE TO AVOID ACCIDENTAL DEPLOYMENT AND PERSONAL INJURY. FAILURE TO FOLLOW THESE INSTRUCTIONS MAY RESULT IN PERSONAL INJURY.







2. Remove the battery hold down bracket.







3. Remove the battery.







4. Remove the bolts.

NOTE: Remove the foam insulator to reveal the bolts.







5. Remove the battery tray.
1 Slide the battery tray forwards to release the tangs.
2 Remove the battery tray.


NOTE: Take care not to break the tangs.







6. Detach the Battery Junction Box (BJB).
1 Remove the cable ties.
2 Remove the bolt.
^ Position the BJB to one side.







7. Remove the battery tray.

INSTALLATION

















1. To install, reverse the removal procedure.