Selector Lever Cable Adjustment-Column Shift

Selector Lever Cable Adjustment-Column Shift

NOTE: The shift control adjustment procedure must be performed in the order shown.

1. Position the transaxle range selector lever in OVERDRIVE. Hang a 1.4 kg (3 lb) weight on the lever.





2. Loosen the manual control lever-to-shift control cable nut.





3. Position the manual control lever in OVERDRIVE. Tighten the manual control lever-to-shift control cable nut.
4. Remove the 1.4 kg (3 lb) weight. Check the operation of the transaxle in each transaxle range selector lever position.